AVK Dry Barrel Hydrant High Pressure - Model 2700
This state of the art Dry Barrel Hydrant was developed in co-operation with fire departments and the fire protection industry ensures the highest safety level and the fulfillment of requirements for high pressure and maximum flow.
Teamwork with water works engineers safeguards minimum maintenance, easy repair, corrosion resistance and low weight in accordance with the utility companies demands. Easily replaced after knock-offs without digging up asphalt, concrete or the like. Simply the hydrant of the next century. AVK builds long life and safety into your pipelines.
Meets or exceeds AWWA C502, latest revision and UL/FM requirements.
- High Pressure 200 PSI
- Ductile iron Nozzle Section, Barrel Sections and Base
- Low weight
- UV-resistant Polyester coating above ground, Epoxy/Bitumen coating below ground
- Minimum 5 1/4" valve bore for high flow rating
- Hydrant removable under pressure from the main valve and up
- Traffic section for easy reinstallation after being knocked off
- Extensions available in lengths of 6-60" with 6" increments
- 360° rotation possible
- Removable outlet nozzles, interchangeable 4"/4 1/2" pumper nozzle
- Easy removable hydrant seat with "short" seat removal wrench
- Drain channel 360° all bronze
- Travel stop nut in the nozzle section for high safety
- Exchangeable inlet shoe for flanged Mechanical Joint or Push-on without dismantling the hydrant
- UL listed and FM approved
For more information, please visit click here.
AVK Resilient Seat Gate Valve to AWWA C509
The American AVK range of resilient gate valves is developed to meet the water works and fire protection industry's demand for maintenance-free products of very strong and sturdy design. The statistic quality control of the AVK products warrants a consistent high quality level.
Meets or exceeds all requirements of AWWA C509 standard,latest revision.
- Ductile iron gland flange
- Additional wiper ring to prevent impurities from entering the stem sealing system and to protect O-rings
- Two O-ring stem seals chambered in a bronze stem-seal box to reduce friction and to prevent wear and tear
- An additional third O-ring stem seal ensures 100% tight stem sealing
- O-ring stem seal replaceable under pressure
- Low-torque operation
- High-strength bronze stem. Available in low-zinc bronze or stainless steel
- O-ring type bonnet gasket surrounds and encapsulates each bonnet bolt to prevent bolt corrosion
- Fully rubber encapsulated wedge
- Wedge nut of low-zinc bronze
- Full-diameter water way, enabling tapping
- Electro-statically applied fusion-bonded epoxy coating inside and outside for excellent corrosion resistance
- Unique valve design with sealed countersunk bolts providing no exposure of bonnet bolts
- All end configurations available incl. Tapping Valve
- Full range 1"-16". Also available in 250 PSI pressure rating
For more information, please click here.
|
